Metadata-Version: 2.1
Name: enviroplus
Version: 0.0.6
Summary: Enviro pHAT Plus environmental monitoring add-on for Raspberry Pi
Home-page: https://www.pimoroni.com
Author: Philip Howard
Author-email: phil@pimoroni.com
License: MIT
Project-URL: GitHub, https://www.github.com/pimoroni/enviroplus-python
Description: # Enviro+
        
        Designed for environmental monitoring, Enviro+ lets you measure air quality (pollutant gases and particulates), temperature, pressure, humidity, light, and noise level. Learn more - https://shop.pimoroni.com/products/enviro-plus
        
        
        [![Build Status](https://travis-ci.com/pimoroni/enviroplus-python.svg?branch=master)](https://travis-ci.com/pimoroni/enviroplus-python)
        [![Coverage Status](https://coveralls.io/repos/github/pimoroni/enviroplus-python/badge.svg?branch=master)](https://coveralls.io/github/pimoroni/enviroplus-python?branch=master)
        [![PyPi Package](https://img.shields.io/pypi/v/enviroplus.svg)](https://pypi.python.org/pypi/enviroplus)
        [![Python Versions](https://img.shields.io/pypi/pyversions/enviroplus.svg)](https://pypi.python.org/pypi/enviroplus)
        
        # Installing
        
        You're best using the "One-line" install method if you want all of the UART serial configuration for the PMS5003 particulate matter sensor to run automatically.
        
        **Note** The code in this repository supports both the Enviro+ and Enviro Mini boards. _The Enviro Mini board does not have the Gas sensor or the breakout for the PM sensor._
        
        ![Enviro Plus pHAT](./Enviro-Plus-pHAT.jpg)
        ![Enviro Mini pHAT](./Enviro-mini-pHAT.jpg)
        
        :warning: This library now supports Python 3 only, Python 2 is EOL - https://www.python.org/doc/sunset-python-2/
        
        ## One-line (Installs from GitHub)
        
        ```
        curl -sSL https://get.pimoroni.com/enviroplus | bash
        ```
        
        **Note** report issues with one-line installer here: https://github.com/pimoroni/get
        
        ## Or... Install and configure dependencies from GitHub:
        
        * `git clone https://github.com/pimoroni/enviroplus-python`
        * `cd enviroplus-python`
        * `sudo ./install.sh`
        
        **Note** Raspbian Lite users may first need to install git: `sudo apt install git`
        
        ## Or... Install from PyPi and configure manually:
        
        * Run `sudo python3 -m pip install enviroplus`
        
        **Note** this wont perform any of the required configuration changes on your Pi, you may additionally need to:
        
        * Enable i2c: `raspi-config nonint do_i2c 0`
        * Enable SPI: `raspi-config nonint do_spi 0`
        
        And if you're using a PMS5003 sensor you will need to:
        
        * Enable serial: `raspi-config nonint set_config_var enable_uart 1 /boot/config.txt`
        * Disable serial terminal: `sudo raspi-config nonint do_serial 1`
        * Add `dtoverlay=pi3-miniuart-bt` to your `/boot/config.txt`
        
        And install additional dependencies:
        
        ```
        sudo apt install python3-numpy python3-smbus python3-pil python3-setuptools
        ```
        
        ## Alternate Software & User Projects
        
        * enviro monitor - https://github.com/roscoe81/enviro-monitor
        * mqtt-all - https://github.com/robmarkcole/rpi-enviro-mqtt - now upstream: [see examples/mqtt-all.py](examples/mqtt-all.py)
        * adafruit_io.py - https://github.com/dedSyn4ps3/enviroplus-python/blob/master/examples/adafruit_io.py - uses Adafruit Blinka and BME280 libraries to publish to Adafruit IO
        * enviroplus_exporter - https://github.com/tijmenvandenbrink/enviroplus_exporter - Prometheus exporter (with added support for Luftdaten and InfluxDB Cloud)
        * homekit-enviroplus - https://github.com/sighmon/homekit-enviroplus - An Apple HomeKit accessory for the Pimoroni Enviro+
        * go-enviroplus - https://github.com/rubiojr/go-enviroplus - Go modules to read Enviro+ sensors
        
        ## Help & Support
        
        * GPIO Pinout - https://pinout.xyz/pinout/enviro_plus
        * Support forums - http://forums.pimoroni.com/c/support
        * Discord - https://discord.gg/hr93ByC
        
        # Changelog
        0.0.6
        -----
        
        * Fix noise by specifying adau7002 device
        
        0.0.5
        -----
        
        * Drop Python 2.x support
        * Add "available()" method for gas sensor
        
        0.0.4
        -----
        
        * Add support for ads1015 >= v0.0.7 (ADS1115 ADCs)
        * Packaging tweaks
        
        0.0.3
        -----
        
        * Fix "self.noise_floor" bug in get_noise_profile
        
        0.0.2
        -----
        
        * Add support for extra ADC channel in Gas
        * Handle breaking change in new ltr559 library
        * Add Noise functionality
        
        0.0.1
        -----
        
        * Initial Release
        
Keywords: Raspberry Pi
Platform: UNKNOWN
Classifier: Development Status :: 4 - Beta
Classifier: Operating System :: POSIX :: Linux
Classifier: License :: OSI Approved :: MIT License
Classifier: Intended Audience :: Developers
Classifier: Programming Language :: Python :: 3
Classifier: Topic :: Software Development
Classifier: Topic :: Software Development :: Libraries
Classifier: Topic :: System :: Hardware
Requires-Python: >=3.6
Description-Content-Type: text/markdown
