Metadata-Version: 1.1
Name: xml2rfc
Version: 2.9.4
Summary: Xml2rfc generates RFCs and IETF drafts from document source in XML according to the dtd in RFC2629.
Home-page: https://tools.ietf.org/tools/xml2rfc/trac/
Author: Henrik Levkowetz
Author-email: henrik@levkowetz.com
License: Simplified BSD Licence
Download-URL: https://pypi.python.org/pypi/xml2rfc
Description-Content-Type: UNKNOWN
Description: Introduction
        ============
        
        The IETF_ uses a specific format for the standards and other documents it
        publishes as RFCs_, and for the draft documents which are produced when
        developing documents for publications.  There exists a number of different
        tools to facilitate the formatting of drafts and RFCs according to the
        existing rules, and this tool, **xml2rfc**, is one of them.  It takes as input
        an xml file which contains the text and meta-information about author names
        etc., and transforms it into suitably formatted output.  The input xml file
        should follow the DTD given in RFC2629_ (or it's `inofficial successor`_).
        
        The current incarnation of **xml2rfc** provides output in the following
        formats: Paginated and unpaginated ascii text, html, nroff, and expanded xml.
        Only the paginated text format is currently (January 2013) accepable as draft
        submissions to the IETF.
        
        .. _IETF: https://www.ietf.org/
        .. _RFCs: https://www.rfc-editor.org/
        .. _RFC2629: https://tools.ietf.org/html/rfc2629
        .. _inofficial successor: https://tools.ietf.org/html/draft-mrose-writing-rfcs
        
        Installation
        ============
        
        System Install
        --------------
        
        To install a system-wide version of xml2rfc, download and unpack the `xml2rfc 
        distribution package`_, then cd into the resulting package directory and run::
        
            $ python setup.py install
        
        Alternatively, if you have the 'pip_' command ('Pip Installs Packages') installed,
        you can run pip to download and install the package::
        
            $ pip install xml2rfc
        
        .. _lxml:				http://lxml.de/
        .. _pip:				https://pypi.python.org/pypi/pip
        .. _xml2rfc distribution package:	https://pypi.python.org/pypi/pip
        .. _requests:				http://docs.python-requests.org/
        
        
        User Install
        ------------
        
        If you want to perform a local installation for a specific user,
        you have a couple of options.  You may use python's default location
        of user site-packages by specifying the flag ``--user``.  These locations are:
        
            * UNIX: $HOME/.local/lib/python<ver>/site-packages
            * OSX: $HOME/Library/Python/<ver>/lib/python/site-packages
            * Windows: %APPDATA%/Python/Python<ver>/site-packages
        
        You can additionally combine the flag ``--install-scripts`` with ``--user`` to
        specify a directory on your PATH to install the xml2rfc executable to.  For
        example, the following command::
        
            $ python setup.py install --user --install-scripts=$HOME/bin
        
        will install the xml2rfc library and data to your local site-packages
        directory, and an executable python script ``xml2rfc`` to $HOME/bin.
        
        Custom Install
        --------------
        
        The option ``--prefix`` allows you to specify the base path for all
        installation files.  The setup.py script will exit with an error if your
        PYTHONPATH is not correctly configured to contain the library path
        the script tries to install to.
        
        The command is used as follows::
        
            $ python setup.py install --prefix=<path>
        
        For further fine-tuning of the installation behavior, you can get a list
        of all available options by running::
        
            $ python setup.py install --help
        
        Usage
        =====
        
        xml2rfc accepts a single XML document as input and outputs to one or more conversion formats.
        
        **Basic Usage**: ``xml2rfc SOURCE [options] FORMATS...``
        
        **Options**
            The following parameters affect how xml2rfc behaves, however none are required.
            
            ===============  ======================= ==================================================
            Short            Long                    Description
            ===============  ======================= ==================================================
            ``-C``           ``--clear-cache``       purge the cache and exit
            ``-h``           ``--help``              show the help message and exit
            ``-n``           ``--no-dtd``            disable DTD validation step
            ``-N``           ``--no-network``        don't use the network to resolve references
            ``-q``           ``--quiet``             dont print anything
            ``-v``           ``--verbose``           print extra information
            ``-V``           ``--version``           display the version number and exit
        
            ``-b BASENAME``  ``--basename=BASENAME`` specify the base name for output files
            ``-c CACHE``     ``--cache=CACHE``       specify an alternate cache directory to write to
            ``-D DATE``      ``--date=DATE``         run as if todays date is DATE (format: yyyy-mm-dd)
            ``-d DTD``       ``--dtd=DTD``           specify an alternate dtd file
            ``-o FILENAME``  ``--out=FILENAME``      specify an output filename
            ===============  ======================= ==================================================
        
        **Formats**
            At least one but as many as all of the following output formats must
            be specified. The destination file will be created according to the
            argument given to --filename.  If no argument was given, it will
            create the file(s) "output.format".  If no format is specified, xml2rfc
            will default to paginated text (``--text``).
        
            ===========     ============================================================
            Command         Description
            ===========     ============================================================
            ``--raw``       outputs to a text file, unpaginated
            ``--text``      outputs to a text file with proper page breaks
            ``--nroff``     outputs to an nroff file
            ``--html``      outputs to an html file
            ``--exp``       outputs to an XML file with all references expanded
            ===========     ============================================================
        
        
        **Examples**
            | ``xml2rfc draft.xml``
            | ``xml2rfc draft.xml --dtd=alt.dtd --basename=draft-1.0 --text --nroff --html``
        
        Dependencies
        ============
        xml2rfc depends on the following packages:
        
        * lxml_ *(> 2.2.7)*
        * requests_ *(> 2.5.0)*
        
        
        Changelog
        =========
        
        
        Version 2.9.4 (16 Feb 2018)
        ------------------------------------------------
        
        
          * Fixed a bug in the date output format when no month or numeric month
            is given in <date>.
        
        
        
        
        
        
        Version 2.9.3 (15 Feb 2018)
        ------------------------------------------------
        
        
          * Changed the way <date> defaults are calculated.  Previously, today's
            date were used to populate missing day if month and year matched, and
            to populate month if year matched.  However, if today's date lay in an
            adjoining month, even if it was within days of that month, the day
            would be set to the first of the given month.  This commit changes that,
            to use the last day of the month instead of the first of the month, if
            the month is the previous month to today's date.  This will result in
            a different derived date than earlier, closer to today's date.  This
            fixes issue #337.
        
          * Fixed a bug in a preptool.py error message.  Reverted a prettyprinting 
            change which caused inconsistent behaviour between writers.
        
          * Moved normalize_month() to utils, for use in multiple writers.
        
          * Made the makefile less verbose.
        
          * Improved the pretty-printing of v2v3 output.  Fixed a bug in the 
            attribute_xref_target() handler name that prevented it from being called.
        
          * Removed whitespace normalization from v2v3 writer.
        
          * Moved handling of exempted default attributes in preptool inside 
            get_attribute_defaults(), for consistency.
        
          * Added an option --liberal to permit re-processing of prepped source 
            without error exit.  This mode will be needed when we make the preptool 
            part of the default processing pipeline.  Also removed whitespace 
            normalization for v2v3, exp, and preptool output, in order to not change 
            authors' text formatting when not needed.
        
          * Lowered the requirement on six to 1.4.1 in order to make installation
            easier on some systems with locked system python libs that include six.
        
        
        
        
        
        
        
        Version 2.9.2 (09 Feb 2018)
        ------------------------------------------------
        
        
          * Fixed issues with packaging and with execution under python 2.7.  
            Fixes issue #342 and #343.
        
        
        
        
        
Platform: UNKNOWN
Classifier: Development Status :: 5 - Production/Stable
Classifier: Environment :: Console
Classifier: Operating System :: MacOS :: MacOS X
Classifier: Operating System :: Microsoft :: Windows
Classifier: Operating System :: POSIX :: Linux
Classifier: Programming Language :: Python
Classifier: Topic :: Text Processing
Classifier: Topic :: Text Processing :: Markup :: XML
Classifier: License :: OSI Approved :: BSD License
