Metadata-Version: 2.1
Name: lw-trv-proxy
Version: 0.6.2
Summary: A Lightwave RF Proxy
Home-page: https://github.com/ColinRobbins/Homeassistant-Lightwave-TRV
Author: Colin Robbins
Author-email: colin.john.robbins@gmail.com
License: UNKNOWN
Platform: UNKNOWN
Classifier: Programming Language :: Python :: 3
Classifier: License :: OSI Approved :: MIT License
Classifier: Operating System :: OS Independent
Requires-Python: >=3.6
Description-Content-Type: text/markdown

# Lightwave TRV Integration for HomeAssistant

This adds support for Thermostatic Radiator Valves (TRVs) to the LightwaveRF integration into HomeAssistant.
This is for Series 1 Lightwave.

## Getting Started

Lightwave does not provide an interface, via the API, to query the Lightwave Hub for the current TRV status.  Instead the status is broadcast to the LAN.
This proxy captures the TRV broadcast messages, and makes them available to a HomeAssistant polling loop.

### Installing

* github
```
git clone https://github.com/ColinRobbins/Homeassistant-Lightwave-TRV.git
```
* pip
```
pip3 install lw-trv-proxy
```

### Requirement
HomeAssistant 0.109 or greater


## Configuration
See [HomeAssistant/Lightwave](https://www.home-assistant.io/integrations/lightwave/)

## Run the proxy
The proxy is (by default) configured to run on the same server as HomeAssistant.
No configuration should be needed.   Simply run it...
```
lwproxy &
```
Command line options:
* ```-v``` verbose
* ```-i ip_address``` IP addres to run the proxy on.  Default 127.0.0.1
* ```-p port``` Port to run the proxy on. Default 7878

## Reboot
You will need to run this as a service to survive reboots etc.  I've created a ```systemctl``` template service description in ```lwproxy.service```.
## Test
Restart hass.  (A restart is required, simply re-reading config is not sufficient)

## Authors

* **Colin Robbins** - *Initial work* - [ColinRobbins](https://github.com/ColinRobbins)

## License

This project is licensed under the same term as HomeAssistant - see the [LICENSE.md](LICENSE.md) file for details

## Acknowledgements

* [GeoffAtHome](https://github.com/GeoffAtHome) for the initial work that started me investigating how to do this!


