Metadata-Version: 2.1
Name: omegasensor
Version: 0.1
Summary: Omega Smartsensor Python SDK
Home-page: https://github.com/bdinhomega/omega-smartsensor-python
Author: Binh Dinh
Author-email: bdinh@omega.com
License: UNKNOWN
Description: 
        # Omega Smartsensor Python SDK    
         This Python SDK allows you to communicate with Omega Smart Sensor devices via I2C interface or Modbus interface and easily integrate them to embedded platform such as Raspberry Pi, etc...    
            
        ## Requirements    
         Python 3.5+    
            
        ## Installation & Usage    
         ### pip install    
         The package can be installed by running:    
            
        `pip install omegasensor `    
         Then import the package:    
            
        `from omegasensor import *`    
         ### Setuptools    
         Clone from repository. And Install via Setuptools from source directory:    
            
        `python setup.py install --user`    
         ## Getting started    
              
            import time
            from omegasensor import *  
            
            def main():    
                bus = BusModbus('/dev/ttyUSB0', SMARTSENSOR_MODBUS_ADDR)   # for Modbus interface 
                # bus = BusI2C(1, SMARTSENSOR_I2C_ADDR) # for I2C interface
                ss = Smartsensor(bus)    
                
                ss.soft_reset()    
                ss.preset_config()    
                print("Firmware 0x%08x" % ss.read(R.FIRMARE_VERSION))    
                print("Device Id 0x%08x" % ss.read(R.DEVICE_ID))    
                print("Device %s" % ss.read(R.DEVICE_NAME))    
                sensor_cnt = ss.read(R.NUMBER_OF_SENSORS)    
                print("Onboard %d sensors" % sensor_cnt)    
                print("Onboard %d outputs" % ss.read(R.NUMBER_OF_OUTPUTS))    
                
                sensor_units = [ss.sensor_unit(i) for i in range(sensor_cnt)]    
                
                while True:    
                    print("Time: ", ss.current_time_str())    
                    for i in range(sensor_cnt):    
                        print("%0.2f" % ss.sensor_reading(i),    
                              " %s" % sensor_units[i],    
                              "\t", end='')    
                    print('\n')    
                    time.sleep(1)    
                
                
            if __name__ == "__main__":    
                main()  
          
        ## Examples    
            
         Examples can be found in SDK Example directory  
          
        ## Hardware Setup  
          
        Omega BTH-SMP smart probes can be used with the I2C interface. On Raspberry Pi, here are the connections:
        
        | Raspberry Pi | BTH-SMP |
        |--|--|
        |Pin 3 /BCM 2| SDA|
        |Pin 5 /BCM 3| CLK|
        |Pin 1| 3.3V|
        |Pin 6| GND|
          
        Alternatively, Omega Smart sensor dongle can be used which converts I2C interface to Modbus interface. On Linux system, the dongle will show up as /dev/ttyUSB0 or /dev/ttyACM0 for example.
Platform: UNKNOWN
Classifier: Programming Language :: Python :: 3
Classifier: License :: OSI Approved :: MIT License
Classifier: Operating System :: OS Independent
Description-Content-Type: text/markdown
